Waste Tire Pyrolysis Plant For High Oil

We are offering our customers a wide range of Waste Tire Pyrolysis Plant for High Oil, which are available following Specifications :- 1, Environmental protection a> Waste-gas : during the process of pyrolysis , there will cause 5% waste-gas, but the waste-gas can be burnt again in the reactor as fuel materials to keep the temperature in the reactor, have you noticed the green hole in the reactor, the waste-gas enter into the hole and is burnt again. So there is no waste-gas at all. b> Waste-water: there is a water-recycling system in the set of plant, all the process, the water can be used circulatory. So there is no waste-water in the process of pyrolysis c> Bad smell: there will be some chemical substances feed into the catalysis tower and burnt together with the tires. It can get rid of bad smell and improve the quality of oil. d> Emission controller: there is emission controller in the set of plant, it wona t cause dirty dust in the process of pyrolysis 2, Technology specialty 1 The raw materials:waste tires, plastics and oil sludge 2 Total Capacity:5t/day,10t/day,20t/day,50t/day,100t/day 3 The size of reactor:2.2*4.5m, 2.2*6m,2.4*6m,2.6*6m,2.8*6 m 4 Average oil productivity:Tire:40%-50%,plastic:60%-70% 5 Average carbon productivity:30%-35% 6 Average steel productivity:10%-15% 7 Average waste-gas productivity:5% 8 Pyrolysis time:8 hours 9 Discharging time:3 hours 10 Feeding time:1 hour