Product Overview
Straight Cutting Oils Excel Cut ST 21 is a low viscosity, light coloured product containing chlorinated EP and oiliness additives. It is suitable for machining operation on mild steels, carbon steel, nickel steels and manganese steels and its use may be extended to copper, aluminium and their alloys if required. Excel Cut ST 23 is the product which contains additives, which impart high oiliness as well as EP properties. It affords good cooling, chip flushing & penetration. It is suitable for high speed automatic machine tools and may also be used as a general purpose machine tool lubricant.Excel Cut ST 55 is medium viscosity dark brown oil containing active sulphur, chlorine and oiliness additives. It is suitable for all machining operations on high tensile steel and for less severe operations on stainless and heat resistant alloys. It is recommended for gear hobbing, thread cutting machines etc.Inspection of Excel Cut ST Oils CHARACTERISTICS EXCEL CUT ST 21 EXCEL CUT ST 23 EXCEL CUT ST 55 Viscosity cSt @40@ C 20-30 27-42 32-42 Flash Point, COC, Deg C, Min 160 160 160 Saponification number, mg KOH/gm, Min. 9-10.5 9.0 9.5 Inactive Sulphur No Yes No Active Sulphur No No Yes Chlorine Yes No Yes
Contact Person
Office No.-528, Dheeraj Heritage, S. V. Road, Santacruz West,
Straight Cutting Oils Excel Cut ST 21 is a low viscosity, light coloured product containing chlorinated EP and oiliness additives. It is suitable for machining operation on mild steels, carbon steel, nickel steels and manganese steels and its use may be extended to copper, aluminium and their alloys if required. Excel Cut ST 23 is the product which contains additives, which impart high oiliness as well as EP properties. It affords good cooling, chip flushing & penetration. It is suitable for high speed automatic machine tools and may also be used as a general purpose machine tool lubricant.Excel Cut ST 55 is medium viscosity dark brown oil containing active sulphur, chlorine and oiliness additives. It is suitable for all machining operations on high tensile steel and for less severe operations on stainless and heat resistant alloys. It is recommended for gear hobbing, thread cutting machines etc.Inspection of Excel Cut ST Oils CHARACTERISTICS EXCEL CUT ST 21 EXCEL CUT ST 23 EXCEL CUT ST 55 Viscosity cSt @40@ C 20-30 27-42 32-42 Flash Point, COC, Deg C, Min 160 160 160 Saponification number, mg KOH/gm, Min. 9-10.5 9.0 9.5 Inactive Sulphur No Yes No Active Sulphur No No Yes Chlorine Yes No Yes
Contact Now
Company Profile