Product Overview
AcA A Fast cure, easy to use AcA A Can be used from -15A A C to +30A A C AcA A Excellent adhesion to a wide variety of substrates ( except PE, PP and PTFE) AcA A Excellent stability, no shrinkage, long service life AcA A High thermal insulation AcA A High acoustical insulation AcA A Excellent water and moisture resistance properties AcA A Can be painted, cut and sanded after completely cured Direction for use: AcA A If can temperature is too low, should be put into warm water of 30A A C for 15 minutes or left overnight in room temperature. AcA A Surface should be clean, free of dust, oil or grease. AcA A Shake the aerosol can for at least 20 seconds. AcA A Moisten surfaces with a water sprayer prior to application. AcA A Vertical gaps should be filled from down to up. AcA A DonAcA A t fill the entire gaps or holes, as the foam will expand in volume. AcA A When fill window or door gaps, the gaps maximum gap size should be 3cm, It should not be used in gaps than 5cm. AcA A If stop the application for time over 5 minutes, remember to shake the can before continuation of work. AcA A If have to work in layers, repeat moistening after each layer. AcA A Uncured foam can be removed through using FOAM CLEANER. Cured foam only can be removed mechanically. AcA A After the foam completely cured, it should be protected from UV by silicone sealant or paint. Notes: AcA A The can temperature should be between +5A A C to +35A A C. AcA A Application temperature is -15A A C ~+30A A C. AcA A Temperature resistance after cured is +30A A C ~+80A A C. AcA A Keep away from directly sunlight and not expose temperature over 50A A C. AcA A Keep away from heat, sparks, flames and static electricity. Turn off sources of ignitions AcA A DonAcA A t burn or pierce aerosol can even after use. AcA A Keep out of reach of children. Storage & Shelf life: AcA A I2 months unopened and stored in dry and cool condition between +5A A C and +25A A C. AcA A Always store can with the valve pointed upwards.
AcA A Fast cure, easy to use AcA A Can be used from -15A A C to +30A A C AcA A Excellent adhesion to a wide variety of substrates ( except PE, PP and PTFE) AcA A Excellent stability, no shrinkage, long service life AcA A High thermal insulation AcA A High acoustical insulation AcA A Excellent water and moisture resistance properties AcA A Can be painted, cut and sanded after completely cured Direction for use: AcA A If can temperature is too low, should be put into warm water of 30A A C for 15 minutes or left overnight in room temperature. AcA A Surface should be clean, free of dust, oil or grease. AcA A Shake the aerosol can for at least 20 seconds. AcA A Moisten surfaces with a water sprayer prior to application. AcA A Vertical gaps should be filled from down to up. AcA A DonAcA A t fill the entire gaps or holes, as the foam will expand in volume. AcA A When fill window or door gaps, the gaps maximum gap size should be 3cm, It should not be used in gaps than 5cm. AcA A If stop the application for time over 5 minutes, remember to shake the can before continuation of work. AcA A If have to work in layers, repeat moistening after each layer. AcA A Uncured foam can be removed through using FOAM CLEANER. Cured foam only can be removed mechanically. AcA A After the foam completely cured, it should be protected from UV by silicone sealant or paint. Notes: AcA A The can temperature should be between +5A A C to +35A A C. AcA A Application temperature is -15A A C ~+30A A C. AcA A Temperature resistance after cured is +30A A C ~+80A A C. AcA A Keep away from directly sunlight and not expose temperature over 50A A C. AcA A Keep away from heat, sparks, flames and static electricity. Turn off sources of ignitions AcA A DonAcA A t burn or pierce aerosol can even after use. AcA A Keep out of reach of children. Storage & Shelf life: AcA A I2 months unopened and stored in dry and cool condition between +5A A C and +25A A C. AcA A Always store can with the valve pointed upwards.
Contact Now
Company Profile