Product Overview
Chemical Name : HDPE-High Density Polyethylene CAS: 9002-88-4 Grade: Blow molding grade, injection molding grade, etc. High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE. Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centi degree /2.16kg) g/10min a 1.0 Tensile yield strength MPa a Y19.0 Flexural modulus Mpa a Y965 Elongation@ break % a Y400 Impact Embrittlement temperature centi degree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application : Mainly used for the production of high toughness of the telephone, cable insulation material
Chemical Name : HDPE-High Density Polyethylene CAS: 9002-88-4 Grade: Blow molding grade, injection molding grade, etc. High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE. Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centi degree /2.16kg) g/10min a 1.0 Tensile yield strength MPa a Y19.0 Flexural modulus Mpa a Y965 Elongation@ break % a Y400 Impact Embrittlement temperature centi degree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application : Mainly used for the production of high toughness of the telephone, cable insulation material
Contact Now
Company Profile