Application:
Remove all dust, laitance or debris the surface must also be free from oil, grease, wax or any other form of foreign matter which might affect adhesion. i,* The surface should be primed with POLYCOTE WH as follows: 1 part of POLYCOTE WH: 2 parts of Water: 4 parts of Cement Mixed material with the above proportion will cover an area of 16-17m2. i,* Topcoat shall be mixed with cement in ratio 1:2 respectively to obtain uniform and consistent slurry avoiding any lump formation i,* Stir the material till the entire quantity is applied, so that solids do not settle at the bottom of the container
Advantage:
Non - toxic, non-flammable and user friendly i,* Can be used in portable water tank also i,* Provides a tough, impermeable waterproof membrane i,* Can be applied by brush, on horizontal and vertical surfaces i,* Excellent adhesion to concrete and masonry surfaces i,* Protects concrete and mortar from natural elements such as wind, rain, sunlight i,* Breathable - allows inside water vapor to escape
Product Type:
WATERPROOFING CHEMICAL
Contact Person
Pearl Plaza complex, Second Floor, B/h G.T Sheth School, 150 Ft Ring Road, Near KKV hall,
POLYCOTE WH is formulated to be mixed with cement on-site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane. Grade : Top Composition : Accurate Is it Effective : Yes Is it Safe : Yes
| Application: | Remove all dust, laitance or debris the surface must also be free from oil, grease, wax or any other form of foreign matter which might affect adhesion. i,* The surface should be primed with POLYCOTE WH as follows: 1 part of POLYCOTE WH: 2 parts of Water: 4 parts of Cement Mixed material with the above proportion will cover an area of 16-17m2. i,* Topcoat shall be mixed with cement in ratio 1:2 respectively to obtain uniform and consistent slurry avoiding any lump formation i,* Stir the material till the entire quantity is applied, so that solids do not settle at the bottom of the container |
| Advantage: | Non - toxic, non-flammable and user friendly i,* Can be used in portable water tank also i,* Provides a tough, impermeable waterproof membrane i,* Can be applied by brush, on horizontal and vertical surfaces i,* Excellent adhesion to concrete and masonry surfaces i,* Protects concrete and mortar from natural elements such as wind, rain, sunlight i,* Breathable - allows inside water vapor to escape |
| Product Type: | WATERPROOFING CHEMICAL |
Contact Now
Company Profile