Soft Touch Keyboard

We are providing a wide assortment of soft touch keyboard which is designed as per the specific requirements of the clients. These keyboards are made upon PCB base. These rigid PCB becomes base circuit and the top layer is polyester with shorting dots. These keyboards do not require any support and the PCB is available in different thickness such as; 1.6mm and 2.4 mm. also, it is avaible in tin, gold and nickel plate. Apart from LEDs and resistors, various other components are also mounted on these keyboards. In addition, we also fabricate PC Compatible special purpose keyboards by mounting Integrated circuits and other components and are available in both embossed type or with a flat top profile. * Solderable Pads on backside of the keypads. This is one of the most reliable termination method and very easy for on sight servicing * Termination via Flat Cable and a connector on one side. The other side of flat cable is soldered to the backside of the keyboard * Termination via berg pins of single/double row, FRC connector, Relimate Connector, or any other connector which can be soldered to the PCB Mounting can be done in one of the following ways: * The Keyboards can be supplied with suitable mounting holes from fixing from front side * Keyboard can have press fitted studs invisible from front side. In this case the keyboard is mounted from the front side and fastened by nuts from the back side