Three Phase UPS

Three Phase UPS We offers centralized Three Phase UPS with the reliability of the award winning Smart-UPS family. Ideal for small data centers, large retail stores, regional offices, and laboratory equipment, the Smart-UPS VT features dual-mains input, automatic bypass, and scalable runtime. Low cost of ownership is achieved through best-in-class efficiency an reduction in rating of electrical infrastructure - wires, transformers, and generators. APC's Network Management Card with temperature monitoring provides remote monitoring and management through Web/ SNMP. Serviceability is greatly enhanced with its user-replaceable batteries and manageable extended run enclosures. The Smart-UPS VT is the easiest UPS in its class to deploy, manage and maintain. Specifications Smart UPSVT Sku Names SUVT15KHS SUVT20KHS SUVT30KHS SUVT40KHS Mains Input Nominal Input Voltage 380/ 400/415V Nominal Input Current (400V) 18.6A 24.8A 37.2A 49.6A General Input Specifications Input Wiring L1, L2, L3, N, PE Input Frequency Tolerance 47-40Hz Input Power Factor >0.98 at Load>50% I THD <5% at full load Max. Short-circuit Withstand Level (ICW) 30 kA Input Voltage Tolerance Utility Operation 304V to 477V at full load, 200V to 477V at half load Dual Mains Input Yes Input Voltage Tolerance Bypass + 10% Standard + 4, 6, 8, 10% (programmable ) Backfeed Protection Built-in backfeed contactor Output Power Rating 15kVA/12kW 20kVA/16kW 30kVA/24kW 40kVA/32kW Nominal Output Voltage 380/400/415V Nominal Output Current (400V) 21.7A 28.9A 43.3A 57.7A General Output Specifications Efficiency in Battery Operation 94.7% 94.7% 94.5% 98.8% Efficiency at Full Load (AC-AC) 95.7% 95.3% 96.4% 96.0% Efficiency at 50% Load (AC-AC) 95.7% 95.7% 96.4% 96.5% Output Wiring L1, L2, L3,N, PE Load Power Factor 0.5 leading to 0.5 lagging Output Frequency Mains synchronized in normal operation 50/60Hz + 0.05% free-running Overload Capacity Utility Operation 125% for 1 minute, 150% for 30 seconds Overload Capacity Battery Operation 150% for 30 seconds V THD <2% from 0 to 100% linear load, <5% full non-linear load Output Voltage Tolerance + 1% static, +5% at 100% load step Battery System Battery Type No internal battery, uses external battery system Communication and Management Communication Interface Network Management Card with Environmental Monitor Control Panel Power View multi-function LCD, status and control console Audible Alarm Yes Emergency Power Off (EPO) Yes Physical Dimensions (H x W x D) mm 823 x 352 x 906 823 x 352 x 906 823 x 523 x 906 823 x 523 x 906 Weights (kg) installed, runtime 134 Kg 134 Kg 182.5 Kg 182.5 Kg Minimum Clearance Around UPS mm Min. rear 100 for ventilation, top 500, front 1000, no side clearance required Color APC Raven Black Floor Anchoring Optional Safety Certification C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-112 Communications and Management Interface Port 1 Smartflot Accessory Port, Serial communication port Web/ SNMP Management Card Included Management Software Included Power Chute Business Edition Environmental Operating Temperature 0 to 40oC Storage Temperature + 15 to 40oC Operating Relative Humidity 0 to 95 % non-condensing Storage Relative Humidity 0 to 95% non-condensing Operating Elevation 0 to 1, 000 m Storage Elevation 0 to 15, 000 m Max. Audible Noise at 1m from unit <45.4 dBA at 70% load, <64 dBA at 100% load <48.5 dBA at <70% load, <67 dBA at 100% load Protection Class IP20