Application:
ASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOSHIELD PU to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry.
Product Type:
WaterProofing & Tile Fixing
Surface Treatment:
Blocks, Brick, Concrete, Renders etc.
Feature:
1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application
Contact Person
Plot.168, Opposite Garden Silk Mills, Tantithaiya, Kadodara-Bardoli Road,
High quality raw content Precisely formulated Longer shelf life Highly permanent elastic Cold applied and cold curing Water based Used for long-lasting waterproofing
| Application: | ASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOSHIELD PU to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry. |
| Product Type: | WaterProofing & Tile Fixing |
| Surface Treatment: | Blocks, Brick, Concrete, Renders etc. |
| Feature: | 1) Excellent adhesion & highly elastic 2) UV resistant 3) Anti-root properties 4) Excellent crack-bridging 5) Excellent waterproofing 6) Easy & economical application |
Contact Now
Company Profile