Product Overview
GIOLITE FR-118, Orange-Silver-Orange Fire Coat Trim has a reflective silver stripe centered with the fluorescent color surface layer, which is bonded to an anti-flame T/C (65% Polyester + 35% Cotton) cloth backing. FR-118 is designed to enhance the visibility of the wearer in low-light condition. Retroreflective Performance Observation Angle Entrance Angle Test result (cd/lux.m2) Minimum coefficient of Retro-reflection in cd/lux.m2 12 5o 500 330 PHYSICAL PERFORMANCE AFTER TEST EXPOSURE After abrasion EN530:1991 Method 2, - 5,000 rubsAfter flexing ISO 7854: 1984, Method A, 7,500 cyclesAfter folding at cold temperature ISO 4675, (20o+1)oCDuring rainfall EN471, Annex DAfter temperature variation 12 hours @ 50+2oC, 20 hours@-30+2oC. cond.>2 hrs.After washingISO 6330: 1984 Method 2A@60oC; dried stress-free at 50+/-5oC. -25 cycles CERTIFICATE : EN532: 1995 :Clothing for protection against heat and flame method of test for limited flame spreadEN533 : 1997 :Protective clothing-Protection against heat and flame-limited flame spread materials and clothingEN471 : 2003 clause6.2.1 : High Visibility Warning Clothing for professional use test Specimen reference :14656 Flame application time 10 sec. Face tested FACE Fabric Length direction Fabric Width direction Specimen number 1 2 3 3 5 6 Duration of flaming (sec.) 0 0 0 0 0 0 Flaming debris N N N N N N Flame reached an edge N N N N N N Formation of hole N N N N N N Afterglow spreads beyond flame area N/A N/A N/A N/A N/A N/A Tear length (if required) mm N/A N/A N/A N/A N/A N/A Requirements Limited flame spread index 1 : No specimen shall permit any part of the lowest boundary of any flame or hole to reach the upper or either vertical edge. No specimen shall give flaming debris. Any afterglow shall not spread from the carbonized area to the undamaged area after the cessation of flaming. Limited flame spread index 2 : The requirements of limited flame spread index 1 shall be satisfied and in addition, no specimen shall give hole formation. Limited flame spread index 3 : The requirements of limited flame spread index 2 shall be satisfied and in addition, the mean after flame time of any set of six specimen shall not exceed 2 seconds. Application Instructions Sewing More than 2mm from the edge of the reflective fabric is required No more than 12 stitches per inch (2.54 cm) Sewing thread 100% Polyester is recommended Care instructions for the finished product Home Wash Washing Washer Standard Household Washing Machine Temperature 60oC Detergent Standard Household Detergent Setting Colored Clothing without Pre-wash Maximum washing time on highest temperature not to exceed 12 minutes. Maximum total washing time not to exceed 50 minutes. Test fabric for dye migration. Bleaching Not Recommended Drying Tumble Dry Low Ironing Do not use steam, use a cool or warm temperature setting, avoid direct contact of the tape when ironing, use a press cloth. Technical Specifications Standard Width Roll Length Qty / Carton Weight / Carton Volume / Carton 51mm(+1mm)/ 19mm 50 MTS 600 MTS 19.5 KGS 0.035 CBM 76mm(+1mm)/ 25mm 50 MTS 400 MTS 19.0 KGS 0.035 CBM Storage Keep away from the direct sunlight, hot and humid place. Use within 2 years from the date of the lot number (production date).
GIOLITE FR-118, Orange-Silver-Orange Fire Coat Trim has a reflective silver stripe centered with the fluorescent color surface layer, which is bonded to an anti-flame T/C (65% Polyester + 35% Cotton) cloth backing. FR-118 is designed to enhance the visibility of the wearer in low-light condition. Retroreflective Performance Observation Angle Entrance Angle Test result (cd/lux.m2) Minimum coefficient of Retro-reflection in cd/lux.m2 12 5o 500 330 PHYSICAL PERFORMANCE AFTER TEST EXPOSURE After abrasion EN530:1991 Method 2, - 5,000 rubsAfter flexing ISO 7854: 1984, Method A, 7,500 cyclesAfter folding at cold temperature ISO 4675, (20o+1)oCDuring rainfall EN471, Annex DAfter temperature variation 12 hours @ 50+2oC, 20 hours@-30+2oC. cond.>2 hrs.After washingISO 6330: 1984 Method 2A@60oC; dried stress-free at 50+/-5oC. -25 cycles CERTIFICATE : EN532: 1995 :Clothing for protection against heat and flame method of test for limited flame spreadEN533 : 1997 :Protective clothing-Protection against heat and flame-limited flame spread materials and clothingEN471 : 2003 clause6.2.1 : High Visibility Warning Clothing for professional use test Specimen reference :14656 Flame application time 10 sec. Face tested FACE Fabric Length direction Fabric Width direction Specimen number 1 2 3 3 5 6 Duration of flaming (sec.) 0 0 0 0 0 0 Flaming debris N N N N N N Flame reached an edge N N N N N N Formation of hole N N N N N N Afterglow spreads beyond flame area N/A N/A N/A N/A N/A N/A Tear length (if required) mm N/A N/A N/A N/A N/A N/A Requirements Limited flame spread index 1 : No specimen shall permit any part of the lowest boundary of any flame or hole to reach the upper or either vertical edge. No specimen shall give flaming debris. Any afterglow shall not spread from the carbonized area to the undamaged area after the cessation of flaming. Limited flame spread index 2 : The requirements of limited flame spread index 1 shall be satisfied and in addition, no specimen shall give hole formation. Limited flame spread index 3 : The requirements of limited flame spread index 2 shall be satisfied and in addition, the mean after flame time of any set of six specimen shall not exceed 2 seconds. Application Instructions Sewing More than 2mm from the edge of the reflective fabric is required No more than 12 stitches per inch (2.54 cm) Sewing thread 100% Polyester is recommended Care instructions for the finished product Home Wash Washing Washer Standard Household Washing Machine Temperature 60oC Detergent Standard Household Detergent Setting Colored Clothing without Pre-wash Maximum washing time on highest temperature not to exceed 12 minutes. Maximum total washing time not to exceed 50 minutes. Test fabric for dye migration. Bleaching Not Recommended Drying Tumble Dry Low Ironing Do not use steam, use a cool or warm temperature setting, avoid direct contact of the tape when ironing, use a press cloth. Technical Specifications Standard Width Roll Length Qty / Carton Weight / Carton Volume / Carton 51mm(+1mm)/ 19mm 50 MTS 600 MTS 19.5 KGS 0.035 CBM 76mm(+1mm)/ 25mm 50 MTS 400 MTS 19.0 KGS 0.035 CBM Storage Keep away from the direct sunlight, hot and humid place. Use within 2 years from the date of the lot number (production date).
Contact Now
Company Profile