Product Overview
Clients can avail from us Electric Air Duct Heater which is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature. The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops. Over temperature controller is installed in the Junction Box.The low temperature type air duct heater can be directly installed on the air duct, Due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the Junction Box clamp,not only to decrease the whole duct external heat dissipation,but also bring down the temperature in the junction box. Characteristics:- 1.Heating tube adopts outer coiled ripple-type SS belt, which enlarges the heat dissipation area, thus, it greatly improves the Heat exchange efficiency. 2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle. 3.Duplex protection, good safety performance. Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of over temperature and without wind, thus, to guarantee Not a single miss in a ten thousand times.
Clients can avail from us Electric Air Duct Heater which is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature. The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops. Over temperature controller is installed in the Junction Box.The low temperature type air duct heater can be directly installed on the air duct, Due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the Junction Box clamp,not only to decrease the whole duct external heat dissipation,but also bring down the temperature in the junction box. Characteristics:- 1.Heating tube adopts outer coiled ripple-type SS belt, which enlarges the heat dissipation area, thus, it greatly improves the Heat exchange efficiency. 2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle. 3.Duplex protection, good safety performance. Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of over temperature and without wind, thus, to guarantee Not a single miss in a ten thousand times.
Contact Now
Company Profile