Pipe Anti-Corrosion Tape

The HLD-T200 series is Pipe Anti-Corrosion Tape for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering. IIA Structure: A TheA specificationA ofA theA tapeA consistsA ofA twoA layers,A adhesiveA layerA andA filmA backing. Adhesive:A butylA rubber FilmA backing:A SpecialA blendA ofA stabilizedA polyethylene. IIIA Features: Heavy duty adhesive Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Conformable to irregular shapes. Meets ASTM Standard Cold applied IVA PhysicalA properties: PhysicalA Properties : TestA Method : TypicalA Value : English : Metric TotalA thickness : ASTMA DA 1000 : : 0.35-1.00mm BackingA thickness : ASTMA DA 1000 : : 0.22-0.42mm AdhesiveA thickness : ASTMA DA 1000 : : 0.13-0.62mm Width : - : : 50-900mm Length : - : : 10-183m BackingA color : - : White : White TensileA strength : ASTMA DA 1000 : : 18Mpa Elongation : ASTMA DA 1000 : 280% : 280% PeelA AdhesionA toA backing : ASTMA DA 1000 : : 10A N/cm CathodicA Disbondment : ASTMA GA 8 : 0.252A inA radius : 6.4mm DielectricA Strength : ASTMA DA 149 : 27.0A KV : 27.0A KV VolumeA Resistivity : ASTMA DA 257 : 2.4A 1015A ohm.cm : 2.4A 1015A ohm.cm WaterA Absorptivity : ASTMA DA 570 : 0.06% : 0.06% WaterVaporTransmissioinRate24A h : ASTMA FA 1249 : 0.A 083A g/100sqA in/24hr : 0.13A g/A m2.24h ApplicationA Temperature : - : -29A FA toA 185A A F : -34A CA toA +85A A C MaxA ServiceA Temperature : - : 185A F : +85A A C