Product Overview
Our firm is producing and exporting of Induction Heater For Forging to our patrons with the following specification: Maximum output power: 40KW Frequency: 10-40KHz Maximum input current: 80A Input voltage: 380VAC 3phases, 50 or 60Hz Duty cycle: 100% Cooling water: 0.1Mpa 32L/min Auto heating time: 0.1-99.9seconds Auto retaining time: 0.1-99.9seconds Auto cooling time: 0.1-99.9seconds Main characteristics: 1. IGBT inversion technology based LC series circuit. 2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically. 3. diode rectifier cause high power factor more than 0.95 4. working continuously with 100% duty cycle, power can be instantly turned on or shut off. 5. perfect protective circuit and cooling system design, which ensure the good reliability of machine. 6. low energy consumption: Converts up to 97.5% above of the expended energy into useful heat. Energy saving 15%-30% compared with SCR induction heating machine. 7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating waste heat, noxious emissions and loud noise. 8. operating and installation easily and safely 9. can subsititue traditional heating methods. Application: Bolt, nut forging Heat treatment of shaft, gear, pin, etc. Shrink-fitting Annealing of pipe welding
Our firm is producing and exporting of Induction Heater For Forging to our patrons with the following specification: Maximum output power: 40KW Frequency: 10-40KHz Maximum input current: 80A Input voltage: 380VAC 3phases, 50 or 60Hz Duty cycle: 100% Cooling water: 0.1Mpa 32L/min Auto heating time: 0.1-99.9seconds Auto retaining time: 0.1-99.9seconds Auto cooling time: 0.1-99.9seconds Main characteristics: 1. IGBT inversion technology based LC series circuit. 2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically. 3. diode rectifier cause high power factor more than 0.95 4. working continuously with 100% duty cycle, power can be instantly turned on or shut off. 5. perfect protective circuit and cooling system design, which ensure the good reliability of machine. 6. low energy consumption: Converts up to 97.5% above of the expended energy into useful heat. Energy saving 15%-30% compared with SCR induction heating machine. 7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating waste heat, noxious emissions and loud noise. 8. operating and installation easily and safely 9. can subsititue traditional heating methods. Application: Bolt, nut forging Heat treatment of shaft, gear, pin, etc. Shrink-fitting Annealing of pipe welding
Contact Now
Company Profile