Product Overview
Features of YPA Wired Condenser Studio Vocal Microphone : A sensitive, flat response condenser microphone ideal for acoustic instruments Flat frequency response is wide and uniform. Consistent sensitivity through frequency range. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by AA battery or phantom power supply. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Specifications : Microphone Typei Condenser (electret bias) Polar Patterni Cardioid (unidirectional), symmetrical about axis Frequency Responsei 40 to 18,000 Hz Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at 1000 Hz)i 600 ohms Sensitivity (at 1000 Hz)i -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL Switchi Built-in On/Off switch Recommended Input Load Impedancei 800 ohms minimum Output Clipping Level (1 kHz, 1 % THD)i 2000 ohm load -13 dBV (0.22 V) (phantom) -17 dBV (0.14 V) (battery) Maximum SPLi 2000 ohm load: 131 dB (phantom), 127 dB (battery) Self-Noise (Equivalent SPL)i 20 dB typical, A-weighted Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)i 111 dB (phantom); 107 dB (battery)
Features of YPA Wired Condenser Studio Vocal Microphone : A sensitive, flat response condenser microphone ideal for acoustic instruments Flat frequency response is wide and uniform. Consistent sensitivity through frequency range. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by AA battery or phantom power supply. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Specifications : Microphone Typei Condenser (electret bias) Polar Patterni Cardioid (unidirectional), symmetrical about axis Frequency Responsei 40 to 18,000 Hz Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at 1000 Hz)i 600 ohms Sensitivity (at 1000 Hz)i -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL Switchi Built-in On/Off switch Recommended Input Load Impedancei 800 ohms minimum Output Clipping Level (1 kHz, 1 % THD)i 2000 ohm load -13 dBV (0.22 V) (phantom) -17 dBV (0.14 V) (battery) Maximum SPLi 2000 ohm load: 131 dB (phantom), 127 dB (battery) Self-Noise (Equivalent SPL)i 20 dB typical, A-weighted Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)i 111 dB (phantom); 107 dB (battery)
Contact Now
Company Profile