Ypa Wireless Earset Earhook Microphone

Features of YPA Wireless Earset Earhook Microphone : Replacement, lightweight earset microphone Provides high-quality voice pickup A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone The headband surface is matgold plated and headband earhooks are covered with a silicon hose. Easy clip-on style, left or right mounting The sensitivity is 1 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. Lightweight YPA MM4. Omnidirectional Earhook Tan Headset Microphone 3.5mm Screw Lock with Windscreen Compatible with Shure, Sennheiser, AKG and Audio-Technica systems. (Body-Pack Transmitter not included) Specifications : Cartridge type: Back Electret Condenser Frequency range, A 2 dB: 50 Hz a 20 kHz Sensitivity, nominal, A 3 dB at 1 kHz: 1 mV/Pa; -45 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 33 dB(A) re. 20 I Pa (max. 37 dB(A)) Equiv. noise level ITU-R BS.468-4: Typ. 45 dB (max. 49 dB) S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 61 dB(A) Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine Dynamic range: Typ. 90 dB Max. SPL, peak before clipping: 135 dB Output impedance: 30 a 40 ohm Cable drive capability: Up to 300 m (984 ft) Power supply: For wireless systems: Min. 1.5 V a max. 12 V through YPA adapter. Connector: MicroDot Color: beige Microphone weight: 15 g Microphone diameter: 3.5 mm