Product Overview
Diamond Electronics offer Liquid Level Controllers. It is used to execute automatic operation of Motor Pump set depending upon the water level status in underground tank as well as overhead tanks. when the water level reaches below low-level set in over head tanks, the unit switches on the Motor Pump set. Similarly when the water level falls below low-level set in the under ground tank, it switches off the Motor Pump set. Thus dry run of Pump set is avoided. When water level reaches up to high-level set in overhead tank, the unit switches off the Motor Pump set. Float switch Sensor is used to set the Low and High levels. These Float sensors requires no maintenance and thus run for long life with equipment. It is These are offered in 3 models JP1, JP2 and JP3. 1.Model JP1 is for 1 I motor(Pump). It measures 160 x 100 x 70 mm3,weighs 2.3 Kg. It is for 1 No. Boring Pump and 1 No. Overhead Tank and 1 No. Sump if any. 2. Model JP2 is for 1/3 I motor(Pump). It measures 160 x 160 x 70 mm3,weighs 2.3 Kg. It is for 1 No. Boring Pump and 4 Nos. Overhead Tank Tanks. 3. Model JP3 is for 3 I motor(Pump). It measures 280 x 190 x 70 mm3 weighs 3.5Kg.It is for 1 No. Boring Pump and 16 Nos. Overhead Tanks. The Instr Instrument design is a Anti Splasha (Hunting) to avoid frequent start/ start and stop of the Pump. These controllers are used for liquids lifting systems Industri in industrial and Residential Premises
Diamond Electronics offer Liquid Level Controllers. It is used to execute automatic operation of Motor Pump set depending upon the water level status in underground tank as well as overhead tanks. when the water level reaches below low-level set in over head tanks, the unit switches on the Motor Pump set. Similarly when the water level falls below low-level set in the under ground tank, it switches off the Motor Pump set. Thus dry run of Pump set is avoided. When water level reaches up to high-level set in overhead tank, the unit switches off the Motor Pump set. Float switch Sensor is used to set the Low and High levels. These Float sensors requires no maintenance and thus run for long life with equipment. It is These are offered in 3 models JP1, JP2 and JP3. 1.Model JP1 is for 1 I motor(Pump). It measures 160 x 100 x 70 mm3,weighs 2.3 Kg. It is for 1 No. Boring Pump and 1 No. Overhead Tank and 1 No. Sump if any. 2. Model JP2 is for 1/3 I motor(Pump). It measures 160 x 160 x 70 mm3,weighs 2.3 Kg. It is for 1 No. Boring Pump and 4 Nos. Overhead Tank Tanks. 3. Model JP3 is for 3 I motor(Pump). It measures 280 x 190 x 70 mm3 weighs 3.5Kg.It is for 1 No. Boring Pump and 16 Nos. Overhead Tanks. The Instr Instrument design is a Anti Splasha (Hunting) to avoid frequent start/ start and stop of the Pump. These controllers are used for liquids lifting systems Industri in industrial and Residential Premises
Contact Now
Company Profile